Diesel generator units must be familiar with the structure, control for safe operation of the staff induction operation. <SPAN onmouseover=_tipon(this) onmouseout=_tipoff()> The new diesel engine overhaul or just after a group according to the provisions of the run after a 60-hour operation, and make the necessary maintenance.</SPAN> <BR><SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>For new or long-term without running the generator at the input, you must undergo a rigorous inspection, major inspection winding insulation condition, wiring, etc., if not match, the necessary treatment.</SPAN> <BR><SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>Should be gradually increased after starting engine speed, the inspection confirmed that the premise of all good, can be low to no-load rated speed operation.</SPAN> <SPAN onmouseover=_tipon(this) onmouseout=_tipoff()> No-load operation, focused on checking the oil pressure, any abnormal sound, excitation current, phase voltage changes, if any abnormal situation - should immediately stop check.</SPAN> <SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>Identification of the situation, re-start.</SPAN> <SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>If all goes well, you can put into normal operation.</SPAN> <SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>Operator control panel to closely monitor changes in the instrument, whether the extent permitted, and make the appropriate adjustments.</SPAN> <BR><SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>Operation, the operator should keep a safe distance with electric equipment, and wear protective equipment work better.</SPAN> <SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>Note the order of switching operation, such as the power switch should be off the branch, and then disconnect the main switch, and then for four pole double throw knife switch position.</SPAN> <SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>Transmission when in reverse order for.</SPAN> <SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>Remove the stop should be part of the normal load, and then off the main switch, the last off engine, do not pull off the main switch is not allowed, with the diesel engine flameout on their own power.</SPAN> <SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>After the shutdown of the unit for routine checks and record the operation (work diary).</SPAN> <BR><SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>Electric shock in case someone should quickly cut off the power switch, or broken insulation, or equipment promptly so that the power from the mains.</SPAN><SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>Then the rescue, and asked the doctors to the scene to rescue.</SPAN> <SPAN onmouseover=_tipon(this) onmouseout=_tipoff()> In case of electrical equipment in case of flooding, they should immediately cut off on the power supply and report to the local power supply that, then fire.</SPAN> <SPAN onmouseover=_tipon(this) onmouseout=_tipoff()>Electric equipment should be used for dry-type fire extinguishers, carbon dioxide fire extinguishers are not allowed to water.</SPAN> |